Metal Etch Primer

Preparation

• Ensure all areas are clean, dry and free from dust, dirt, corrosion and general surface contamination.
• All oils, grease, etc should be removed with a suitable degreasing solution.
• Do not thin.
• Degreasing with a spirit wipe is recommended and should be carried out after any abrasion of the surface.
• Thorough mechanical preparation (e.G. Power wire brushing, needle gunning, grinding etc) can be utilised for mild environments.

Application

• Stir well before use.
• Application Temperature should be between 5°C-25°C
• To the dry and cleaned surface, apply Britannia Metal Etch Primer by brush, solvent resistant roller or spray.
• Apply at a minimum spreading rate of 10m² per litre.

For detailed application advice refer to the Product Datasheet

Technical Datasheets

• One Pack Etch Primer

Safety Datasheets

• Metal Etch Primer SDS

IMPORTANT SHIPPING & DELIVERY INFORMATION

• Please allow 2-3 working days for delivery.
• Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
• Orders placed after the cut-off of 4pm will not be processed for earliest dispatch until 9am the next working day.
• Any orders placed after 11am on Fridays, over the weekend or on a bank holiday, will be processed the next working day.
• All delivery costs below are including VAT.

Delivery Options

Standard Shipping - Mainland England & Wales

All orders below £100.00

£12.00

Standard Shipping - Scotland inc. Highlands

All orders below £100.00

£18.00

Free Shipping

All orders above £100.00

Free

Where our roofing coatings can be purchased.