Decatone SR60 Tennis Court Paint
£115.00 + VAT
- Slip Resistant
- Wide Range of Colours
- Mould & Algae Resistant
- Long Lasting
Key Features
Coverage
Up to 9m² per litres
Coats
2
Drying Time
Dry: 1-2 hours.
Location
Exterior
Coverage Calculator
Product Details
A tough, long lasting, slip resistant finish in deep, rich colours for macadam and concrete courts
- Slip Resistant Value (SRV) 60 in wet or damp for safer play
- Formulated with an algicide and fungicide
- Wide range of colours, special colours to order
- For airless spray application
A tough, long-lasting finish for macadam tennis courts. Slip resistance of 60 in the wet or damp for safer play, contains algicide and fungicide.
Application Details
Preparation
- All surfaces should be free from loose and flaking material, dirt, grease and vegetative growth.
- Any debris may be removed by vacuum or pressure blasting with air or water.
- Brushing (manual or machine) may be suitable in particularly difficult areas, ie: under trees or areas constantly in the shade.
- Decatone Tarmac Binder should be used to stabilise a friable, porous or aged concrete court or fretting macadam.
Application
- Try and use only 1 batch number per colour used as colour variation can occur.
- Stir well before use as stainers used can separate with time, best to mix thoroughly when using different batches.
- Surfaces that are cold – below 5°C – are not suitable for coating.
- Hot surfaces – above 30°C – should be cooled with water spray before application otherwise paint will dry before film formation is completed.
- New bitumen should be left to harden off before coating. The time will vary with the nature of the surface and the weather. (Minimum 3-4 weeks in summer and up to 3 months in winter).
- New concrete should be allowed to mature for several months before coating.
- Do not over-paint/seal court.
- Recommended application between March and October.
- During the summer months there is a possibility of paint skinning from warm weather/transportation (top of inside lid and rim).
- We recommend that the paint is pre-filtered on site through a course filter to remove skins before spraying.
For detailed application advice refer to the Product Datasheet