Playground Paint

Preparation

• Avoid painting when rain is expected or under poor drying conditions – below 5°C.
• All surfaces should be thoroughly power washed before application of a binder prior to top coating for best results.
• All surfaces should be dry (not damp).
• Free from loose or flaking material, dirt grease and vegetative growth.
• Vacuum or pressure blasting with air or water may remove any debris.
• Brushing (manual or machine) may be suitable.
• Not to be applied if there is salt contamination or frost.

Application

• Stir well before use as stainers used can separate with time, best to mix thoroughly when using different batches.
• Surfaces that are cold – below 5°c – are not suitable for coating. Hot surfaces – above 30°c – should be cooled with water spray before application otherwise paint will dry before film formation is completed.
• Apply an even coat either by brush, roller or by airless spray.
• Tip size of 28 thou is recommended for airless spray.
• A new macadam surface should be left to oxidise for at least four weeks (longer in winter than in summer) before painting.
• Not suitable for use on open graded macadam or other materials incorporating “cut back” bitumen.
• New concrete should be allowed to mature for several months before coating.
• Apply during march to october.
• Some colours may require a second coat.

For detailed application advice refer to the Product Datasheet

Technical Datasheets

• Playground Paint Datasheet

Safety Datasheets

• PLAYGROUND PAINT - WIMBLEDON PURPLE

• PLAYGROUND PAINT - YELLOW

• PLAYGROUND PAINT - WHITE

• PLAYGROUND PAINT - TERRACOTTA

• PLAYGROUND PAINT - TAN

• PLAYGROUND PAINT - SUMMER RED

• PLAYGROUND PAINT - SPRING GREEN

• PLAYGROUND PAINT - SAXE BLUE

• PLAYGROUND PAINT - ORANGE

• PLAYGROUND PAINT - LIGHT HOLLY

• PLAYGROUND PAINT - FOREST GREEN

• PLAYGROUND PAINT - DARK BLUE

• PLAYGROUND PAINT - BRIGHT RED

• PLAYGROUND PAINT - BRICK RED

• PLAYGROUND PAINT - BLACK