Skip to content
FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL MONDAY - FRIDAY 8.30AM - 4.30PM
We Are Currently Closed for the Easter Bank Holiday.
Any order placed during this time will be shipped after the bank holiday weekend.
FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL 8.30AM - 4PM We Are Currently Closed for the Easter Bank Holiday. Any order placed during this time will be shipped after the bank holiday weekend.

Durashield FD Fast Drying Primer

£62.00 + VAT

  • Stabilises Highly Friable/Porous Surfaces
  • Fast Drying
  • Easy To Use
  • Ensures Durashield Topcoat Delivers Optimum Waterproofing Performance
Size
Color: Clear

Key Features

Durashield FD Fast Drying Primer Number of Coats

Coats

1

Durashield FD Fast Drying Primer Drying Time

Drying Time

Touch Dry: 2-4 hours.

Over Coating: 2-4 hours (When Dry)

Durashield FD Fast Drying Primer Location Details

Location

Exterior

Coverage Calculator

Product Details

Ready for use on highly friable/porous surfaces e.g. Concrete, Asbestos Cladding, Sheeting and Guttering, OSB/Plywood, Wooden Substrates and EPDM.
  • Vital stabilisation of highly friable/porous surfaces prior to application of Durashield topcoat
  • Works instantly
  • Ready to use
  • Ensures Durashield topcoat delivers optimum waterproofing performance
  • Rainfall immediately after application has no adverse effect
  • Solvent based
Application Details

Preparation

  • Ensure the substrate is free from old plant and debris.
  • Cut all brick chases if required.
  • The outlets and gutters must be free from obstruction.
  • Do all your dirty work before cleaning!
  • Clean the surface with a powerwash of up to 2,000 psi, depending on the substrate.
  • If needed clean the area with Britannia Fungicidal Wash.
  • Repair faults in the surface by using a high quality waterproof mastic/filler.
  • Apply Durashield FD Primer followed by Durashield Waterproofing System to repaired areas incorporating Britannia Reinforcing Scrim overlapping by 5cm.

Application

  • Do not thin.
  • Stir well before use as separation could occur.
  • Application Temperature should be between 2°C-35°C
  • To the dry and cleaned surface, apply a generous coat of Britannia Durashield FD Primer by brush, roller.
  • Apply at a minimum spreading rate of 3m² per litre.

For detailed application advice refer to the Product Datasheet

Suitable Surfaces

Asbestos

Concrete

OSB/Plywood

EPDM

Datasheets

Technical Datasheets

Safety Datasheets

Roofing Merchants

Where our roofing coatings can be purchased.

Find Merchant
FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL MONDAY - FRIDAY 8.30AM - 4.30PM
We Are Currently Closed for the Easter Bank Holiday.
Any order placed during this time will be shipped after the bank holiday weekend.
FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL 8.30AM - 4PM We Are Currently Closed for the Easter Bank Holiday. Any order placed during this time will be shipped after the bank holiday weekend.
×

Call for Price

I agree to my email being stored and used to receive the newsletter.
.nav-bar__item a[href="/collections/special-offers"] { color: red; }