Skip to content
FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL MONDAY - FRIDAY 8.30AM - 4.30PM
We Are Currently Closed for the Easter Bank Holiday.
Any order placed during this time will be shipped after the bank holiday weekend.
FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL 8.30AM - 4PM We Are Currently Closed for the Easter Bank Holiday. Any order placed during this time will be shipped after the bank holiday weekend.

Tilecoat Advanced

£70.00 + VAT

  • Eco Friendly
  • Long Life Protection
  • Low Sheen Finish
  • Mould & Algae Resistant
Size
Color: Terracotta

Key Features

Tilecoat Advanced Coverage Details

Coverage

Up to 5m² per litre per coat.

Tilecoat Advanced Number of Coats

Coats

2

Tilecoat Advanced Drying Time

Drying Time

Surface Dry: 1-2 hours.

Recoat: After 4-6 hours.

Tilecoat Advanced Location Details

Location

Exterior

Coverage Calculator

Product Details

Renovation coating that brings aged roof tiles back to life

  • Non-drying gloss
  • Solvent free, eco friendly
  • Proven deterrent
  • Can be applied to a wide range of surfaces
Coverage: up to 2.5m2/lt overall, neat

Long lasting external decorative and protective finish for concrete and fibre cement roof tiles. Containing algicide, fungicide and ceramic spheres for improved colour and durability.

Application Details

Preparation

  • The roof area must be thoroughly cleaned, prior to application of the coating in order to remove accumulated dirt, debris, bird faeces, moss, lichen, fungus and all other detritus materials and free from latiance before application.
  • The area to be coated must be pressure washed to remove all substrate contaminates. Care must be taken not to damage the roof structure, whilst pressure washing. Replace any damaged tiles prior to coating.
  • The fungicidal wash solution is best applied by brush, to allow a thorough substrate penetration.
  • The fungicidal wash solution should be applied at a rate of 10-20 square metres per litre.
  • After application the roof should be allowed to dry completely and then inspected to ensure a uniform substrate coverage and that there is no water trapped in joints between the tiles.

Application

  • STIR WELL BEFORE USE.
  • Tilecoat can be sprayed NEAT but may be THINNED with water up to 10% for the first coat and 5% for the final coat.
  • All tile coating work should be carried out in dry conditions and without the forecast of precipitation or frost, within 6 hours of applying the coat.
  • No coating should be carried out in times of condensation conditions or when the relative humidity exceeds 90%.
  • No coating should be carried out when the substrate temperature is below 5°C or above 35°C.
  • The maximum permissible moisture content of the substrate is 21%.
  • If possible do not apply the coating when the roof tiles are very hot, in order that premature surface drying and poor substrate wetting does not occur.
  • When dry after a minimum of 4-6 hours drying the second coat of material may be applied.
  • Note: During the summer months there is a possibility of paint skinning from warm weather/transportation (top of inside lid and rim). We recommend that the paint is pre-filtered on site through a course filter to remove skins before spraying.

For detailed application advice refer to the Product Datasheet

Suitable Surfaces

Concrete

Datasheets

Technical Datasheets

Safety Datasheets

FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL MONDAY - FRIDAY 8.30AM - 4.30PM
We Are Currently Closed for the Easter Bank Holiday.
Any order placed during this time will be shipped after the bank holiday weekend.
FOR EXPERT TECHNICAL ADVICE - GIVE US A CALL 8.30AM - 4PM We Are Currently Closed for the Easter Bank Holiday. Any order placed during this time will be shipped after the bank holiday weekend.
×

Call for Price

I agree to my email being stored and used to receive the newsletter.
.nav-bar__item a[href="/collections/special-offers"] { color: red; }