Solarshield Product Support

Performance Advantages

Available Sizes

Available Colours

Application Details

Preparation

• Stir well before use with a paddle stirrer on low speed as product can settle with time to establish a homogenous product, if using the product over a few hours it is recommended you stir occasionally throughout.
• Do not thin.
• Clear all areas of moss, lichen and debris by brushing or power washing and remove surface water and any contamination such as oil or grease.
• Allow to dry.
• Apply Britannia Fungicidal Wash to prevent further fungal/algal growth.
• Holes, cracks etc., must be repaired or filled prior to application.
• Most roofing substrates to be treated will not normally require priming.

Application

• To the dry and cleaned surface apply Britannia Solarshield by brush or solvent resistant roller.
• Avoid pouring directly onto a horizontal surface. This may cause puddling during application and increase drying time.
• Application temperature should be between 5°C-25°C.

For detailed application advice refer to the Product Datasheet

Coverage Details

• Up to 10m² per litres

Suitable Surfaces

Technical Datasheets

• Solarshield

Safety Datasheets

• SOLARSHIELD SDS

More Information

• 01606 834015
• 01606 837006
• enquiries@britanniapaints.co.uk
• Unit 7/8 King Street Trading Estate, Middlewich, Cheshire CW10 9LF