Polyshield Product Support

Performance Advantages

Available Sizes

Available Colours

Application Details

Preparation

• All roof substrates require priming prior to overcoating with the polyshield.
• These surfaces should be cleaned prior to applying Polyshield.

Application

• Stir well before use.
• Do not thin.
• Polyshield Basecoat is applied by brush or roller to the clean prepared and primed substrate at a minimum of 1 litre per square metre.
• Polyshield Reinforcing Scrim (100gm2) is embedded into the wet Polyshield Basecoat avoiding creasing.
• Adjacent lengths of the reinforcement must overlap by a minimum of 75mm ensuring that there is a sufficient coating to fully encapsulate the lap.
• Polyshield Topcoat is then applied by brush or roller over the dry, clean Polyshield Reinforced Basecoat at a minimum of 0.75 litres per square metre.
• At each stage a check must be made for the presence of pinholes and missed areas, which can be rectified by applying additional coating as necessary.
• Application rates for different substrate types are given in the table below.
• The substrate and ambient temperature for the application of the system must be between 2°c and 35°c.
• Do not apply to frozen or damp surfaces.
• Do not apply in hot direct sunlight or coating may skin.

For detailed application advice refer to the Product Datasheet

Coverage Details

• Up to 0.8m² per

Suitable Surfaces

Technical Datasheets

Safety Datasheets

More Information

• 01606 834015
• 01606 837006
• enquiries@britanniapaints.co.uk
• Unit 7/8 King Street Trading Estate, Middlewich, Cheshire CW10 9LF