Durashield Roof In a Box Product Support

Performance Advantages

Available Sizes

Available Colours

Application Details

Preparation

• Clear all areas of moss, lichen and debris by brushing or power washing and remove surface water and any contamination such as Oil or Grease.
• Allow to dry.
• Apply Britannia Fungicidal Wash to prevent further fungal/algal growth.

Application

• Stir well before use.
• Do not thin.
• The substrate and ambient temperature for the application of the system must be between 5°C – 30°C.
• To the dry and cleaned surface, apply a generous coat of Britannia Durashield FD Primer by brush or solvent resistant roller at a minimum spreading rate of 3-5m² per litre.
• After the Durashield FD Primer has dried.
• Embed the reinforcing scrim into the wet Durashield basecoat applied at a rate of 1m² per litre, whilst avoiding creasing.
• Adjacent lengths of the reinforcement must overlap by 50mm.
• Finish with a further coat of Durashield as a topcoat at a rate of 0.5m² per litre ensuring that the reinforcement scrim is completely encapsulated.
• Final drying time is up to 1.5 hours or overnight depending on temperature and conditions.

For detailed application advice refer to the Product Datasheet

Coverage Details

• Up to 12m² per kit

Suitable Surfaces

Technical Datasheets

• Durashield Roof In A Box Datasheet

• Durashield Adhesion Pull Test

• Durashield Internal Corner Build Up

• Durashield External Corner Build Up

• Durashield Pipe Penetration Build Up

• Durashield Rainwater Outlet Build Up

• Durashield-External-Internal-Corner-Scrim-Details

Safety Datasheets

• Durashield - Grey

• Durashield Primer Fast Drying - Clear

More Information

• 01606 834015
• 01606 837006
• enquiries@britanniapaints.co.uk
• Unit 7/8 King Street Trading Estate, Middlewich, Cheshire CW10 9LF